Stainless Steel Door Hinges Wire Drawing Grinding Polishing Machine (YL-ATPM-006)
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Guangdong
-
Validity to:
Long-term effective
-
Last update:
2017-10-29 09:40
-
Browse the number:
270
+
Guangzhou Yi-Liang Polishing Trading Co., Ltd.
- Contactaixin:
Mr. Jake(Mr.)
- Email: telephone: phone:
-
Arrea:
Guangdong
Address:No. 1, North 3rd Industrial Park, Lanshan Village, Shatou Street, Panyu District, Guangzhou, Guangdong, China 511400
- Website:
+
Stainless Steel Door Hinges wire drawing grinding polishing machine
Door hinge polishing /buffing machine is suitable for the plain surface polishing of stainless steel door hinge, copper door hinge. This machine is equipped with mechanical transmission, easy for both operation and maintenance, and selected quality electrical control panel ensures the stability of the complete machine.
It takes the leads in China to install the emergency stop system on the machines, which ensures the safety operation during production.
Main Shaft (Hexagon) | Rotate Speed: 1800-2200rpm, Length: 600mm, Adjutsing Range: 600mm |
Grinding Time | 0-3 minute |
Size | 1500mm*1500mm*1300mm (L*W*H) |
Weight | 1250kg |
Working Platform | 580mm*400mm, up and down adjusting range: 20-30mm |
In/Out Travel Distance Of Work Table | 400mm |
Sway Range Of Work Table | 0-70mm |
Parameter Of Main Motor
Power Rate | Rotate Speed(RPM) | |
Main Motor | 4 Poles, 5.5/7.5KW | 1400 |
Sway Controling Motor | 4 Poles, 250W | 1400 |
In/Out Controling Motor | 6 Poles, 370W | 980 |
Open/Close Controling Motor | 4 Poles, 400W | 400 |
Voltage: 380V, 3 phase. (Noted: The voltage is measured by industry voltage. We accept custom-made to fix industrial voltage for diffrent countries needed)
Frequency: 50 Hz.
Grinding Area:
1. Area size (length * width ): 600*800mm. It suitable for grinding / polishing the flat work pieces. ( We accept custom-made. )
2. Up and Down Adjustment Range: About 20-30mm.
It is application to metal/copper/brass/zinc/allyoc/stainless steel door hinge matt/satin/mirror/fine effect polishing. It can finish different polishing steps with different abrasive wheel.
Advantage:
1. Easy adjusting height of polishing shaft by regularing adjusting rod. Clockwise adjust for higher shaft, reduce polishing pressure; Anticlockwise adjust for lower shaft, fortify polishing pressure. Note: Adjust slowly in case of not enough pressure or too much pressure.
2. Easy adjustment. (Only with 6 control button to finish all the operate step! And it can adjust the grinding time according your products. )
3. With high efficient production.
It will spend from 30 seconds to 3 minutes to finish one polishing step at one time. More flexible for spoon flat (before shaped) polishing.
other products