Stone Grain Coating Aluminium Honeycomb Panels (HR P021)

Aluminum honeycomb panels are sandwich-structured composites with honeycomb cores. They are manufactured by using a variety of different materials, depending on the intended application and required characteristics, from paper or thermoplastics, used for low strength and stiffness for low load applications, to high strength and stiffness for high performance applications, from aluminum or fiber reinforced plastics. The strength of laminated or sandwich panels depends on the size of the panel, facing material used and the number or density of the honeycomb cells within it.



Specifications of aluminium honeycomb panels 

Standard Thickness:

6mm,10mm,15mm,20mm,25mm

Min Thickness: 2mm

Max Thickness: 500mm

Standard size: 1500x5800mm & 1250x2500mm

Max size: 1600x 12000mm &2000x3000mm

Test report: EN 13501-1, ASTM-E84




Features of aluminium honeycomb panels

Weight 

One of the primary reasons for utilizing aluminum honeycomb panels is that they exhibit excellent strength-to-weight ratios compared to traditional construction materials.

Strength 

The ability to configure panels with different materials allows us to create much stronger panels than one can achieve with solid structures. The skill, however, is in analyzing all of the material choices for meeting your specifications and then selecting those that will provide the most functionality at the lowest cost.

Fire Resistance

Huarui uses a number of materials that are non-combustible and self extinguishing. Most flammability ratings and building codes can be easily met with some combination of materials. 

Thermal Control 

Most aluminum honeycomb panels have excellent insulation properties simply due to the nature in which they are designed. Since both honeycomb and foam cores trap air between the skins, they are inherently insulating to some degree.

Sound Control 

While we do not specialize in acoustical panels, we are happy to incorporate any type of sound deadening specifications into the composite panels that we design. 

Impact Resistance 

Impact resistance can be accounted for by adjusting the honeycomb cell size, utilizing different core materials and skins, or adding thickness to the surface material and/or core.

Moisture Resistance 

All types of aluminum and plastic honeycomb cores can be used to improve water and moisture resistance, but RFP surface materials can also do the job for many applications.

Corrosion Resistance Not only can we utilize different core and surface materials to achieve resistance to weather and chemicals, but coatings can be applied for added security. 





Production facility







Aluminum honeycomb cladding/roofing/canopy/ceilling/ panels
Huarui Honeycomb is an aluminum composite panel comprising of a non-combusible aluminum honeycomb core sandwiched between two aluminum alloy skins. The front skin is always finished with Fluorocarbon(PVDF) coating applied through a continuous coil coating process complying with AAMA2604--98 and protected with a peel-off film to withstand six monthes weathering.The rea skin is finished with a polyester based wash coat.