Rate of Rise Fire Alarm Thermal Heat Dtector
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Guangdong
-
Validity to:
Long-term effective
-
Last update:
2017-10-02 09:56
-
Browse the number:
183
+
Ningbo Ambest Electronics Co., Ltd.
- Contactaixin:
Miss Christine Chen(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Guangdong
Address:46-2 Mogao Road, Dongqian Lake, Ningbo, Zhejiang, China 315121
- Website:
+
Fire alarm Conventional fix temperature heat detector
1. General Description
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This
detector is designed to provide open area protection and to be used with most conventional fire
alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six
seconds indicating that power is applied and the detector is working properly. The LEDs latch on
in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is
outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset
by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a
temperature heat detector
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This
detector is designed to provide open area protection and to be used with most conventional fire
alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six
seconds indicating that power is applied and the detector is working properly. The LEDs latch on
in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is
outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset
by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a
temperature heat detector
| Item | Parameters |
| Height: | 2.2 (55 mm) installed in Base |
| Diameter: | 4.0 (103 mm) |
| Weight: | 5.5 oz. (155 g) |
| Installation Temperatures: | 14°F to 122°F (-10°C to50°C) |
| Operating Humidity Range: | 10% to 93% Relative Humidity Non-condensing |
| Operating Voltage Range: | 9 to 28VDC Volts Non-polarized |
| Standby Current: | 40µA @ 24 VDC |
| Maximum Alarm Current (LED on: ) | ≤30mA @ 24 VDC |
| Fixed Temperature Rating: | 135°F (57°C) |
other products