Spiral Sand Washing Machine, Spiral Sand Cleaning Machine
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Shandong
-
Validity to:
Long-term effective
-
Last update:
2017-10-17 05:07
-
Browse the number:
173
+
Henan Dajia Mining Machinery Co., Ltd.
- Contactaixin:
Mr. Su(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Shandong
Address:West 500M Of Rizhao Road And Gongye Road, Mazhai Industrial Park, Zhengzhou, Henan
- Website:
+
Product Description
Introduction:
Sand washer is widely used in wash-dressing, classifying and purifying process of metallurgy, building materials, water and electricity industries, especially for building sand and road sandstone. In our company, this series is a high-efficient washing device, which adopts advanced technology and combines with the actual situation in domestic sandstone industries. It has advantages of high effective cleaning, rational structure, and large capacity and less wastage sand. Moreover, its driving part is isolated with the sand and water, so its fault rate is lower than the ordinary sand washers at present. It is the best choice for upgrading the sand washer in domestic.
Feature:
1, sand washing machine structure is simple, the impeller transmission bearing device and water and the isolation of water material greatly avoid the bearing due to flooding, sand and pollutants caused by the phenomenon of damage.
2, sand washing machine (sand washing machine) for sand and gravel sand and sand washing machine has a significant advantage compared to the traditional as follows:
A. fine sand and stone powder loss is very little, the sand and the fineness of the construction of the sand to achieve the national "building sand", "building pebbles, gravel" scale.
B. wheel bucket sand washing machine in addition to the screen almost no wearing parts.
C. long life, long-term maintenance.
3, reasonable structure, convenient maintenance, processing capacity, low power consumption, high cleanliness. The novel sealing structure, the full sealed oil bath type transmission device, adjustable overflow weir plate, to ensure that the product is efficient, durable, cleaning, dehydration effect is good, fine particles to maintain the characteristics of chaos.
4, used in the construction site, sand plant, glass factory, water power station and other units used for smaller particles of sand required for washing, grading and dehydration.
Screw Sand Washing Machine Main Technical Parameters:
| Model | XL508 | XL610 | XL762 | XL915 | 2XL915 | XL1115 | 2XL1115 |
| Screw Diameter(mm) | 508 | 610 | 762 | 915 | 915 | 1115 | 1115 |
| Length of Tub(mm) | 6705 | 7225 | 7620 | 7585 | 7585 | 9782 | 9782 |
| Max Feed Size(mm) | ≤ 10 | ≤ 10 | ≤ 10 | ≤ 10 | ≤ 10 | ≤ 10 | ≤ 10 |
| Capacity (t/h) |
20 | 40-50 | 50-75 | 100 | 200 | 175 | 350 |
| Speed of Screw (r/min) |
38 | 32 | 26 | 21 | 21 | 17 | 17 |
| Motor Power ( kw) |
5.5 | 7.5 | 11 | 11 | 2×11 | 15 | 2×15 |
|
Water Consumption (t/h) |
6-60 | 6-63 | 9-63 | 10-80 | 20-160 | 20-150 | 40-300 |
|
Overall Dimensions (mm) (L×W×H) |
8000×2343 ×1430 |
8000×2050 ×1400 |
8545×2650 ×3862 |
8500×2810 ×3600 |
8420×3765 ×3960 |
10970×3945 ×4720 |
10970×5250 ×4720 |
| Weight(t) | 2.67 | 3.80 | 5.23 | 6.27 | 11.11 | 10.18 | 17.94 |
A:Yes,we are factory, which was established in 2010.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.
Q:Guarantee period:
A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
A: Sure.
Q: If i need the complete mineral processing line. is mingxin able to help us build it? A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation,in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price.
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
Welcome friends from all over the world to visit our company and look forward to working with you!
other products
