Melt Flow Index Testing Equipment
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Guangdong
-
Validity to:
Long-term effective
-
Last update:
2017-09-27 06:04
-
Browse the number:
192
+
Dongguan Haida Equipment Co., Ltd.
- Contactaixin:
Mr. Sawyer Mak(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Guangdong
Address:The 1st Industry Area Of Caibai, Daojiao Town, Dongguan, Guangdong, China 523000
- Website:
+
Melt Flow Index Testing Equipment
Melt Flow Index Testing Equipment
1. Melt index tester is used to determine melt-mass flow rate
2. Hi-Q, Reasonable price
Melt Flow Index Testing Equipment
Specially test covers measurement of the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load and position in the barrel for measuring the flow rates of polymer in producing process.
Melt Flow Index Testing Equipment is complied with ASTM, ISO, JIS, CNS method A. The specimen can be cut off automatically either by a pre-setting specified time interval or by manually pressing the control key. It is applicable to test the material with a flow rates that fall between 0.15 and 50g/10min, it is acceptable to install method B as your instruction.
Specification:
Product specification
Accessories
Brush for clean the die
Brush for clean the cylinder
Speculum
Bakelitefunnel for charging sample
Three steel sheets for cutting off the extruded sample
Cylinder gauge
Auto pneumatic loading device
Optional
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
After-service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Melt Flow Index Testing Equipment
1. Melt index tester is used to determine melt-mass flow rate
2. Hi-Q, Reasonable price
Melt Flow Index Testing Equipment
Specially test covers measurement of the rate of extrusion of molten resins through a die of specified length and diameter under prescribed conditions of temperature, load and position in the barrel for measuring the flow rates of polymer in producing process.
Melt Flow Index Testing Equipment is complied with ASTM, ISO, JIS, CNS method A. The specimen can be cut off automatically either by a pre-setting specified time interval or by manually pressing the control key. It is applicable to test the material with a flow rates that fall between 0.15 and 50g/10min, it is acceptable to install method B as your instruction.
|
Design standard |
ASTM-D1238, D3368, JIS-K7210, ISO 1133... |
|
Testing range |
0.1-800.00g/10min (MFR) 0.1-800.00 cm3/10min(MVR) |
|
Temperature range |
Room temperature~400°C |
|
Controlling Accuracy |
±0.2°C |
|
Timing accuracy |
0.1s |
|
Displacement accuracy |
0.01mm |
|
Standard loads |
325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g |
|
Combination load |
325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g |
|
Material cutting method |
Manual, timing and automatic cutting (optional) |
|
Time setting |
0.1~999.9min |
|
Cylinder |
Diameter 9.5504±0.0076mm |
|
Land of piston |
Diameter 9.4742±0.0076mm, length: 6.35±0.13mm |
|
Thin hole pattern |
External diameter: 9.5±0.02mm; bore diameter 2.0955±0.0051mm; length 8.00±0.025mm |
|
Machine Size |
(L×W×H) 40×51×60cm |
|
Weight |
42kg (not including the weights) |
|
Power |
AC220V, 50Hz, single phase |
|
Accessory |
Weights x 1 set Opening mold x 1pc Piston x 1pc Funnel x 1pc Opening mold cleaning rod x 1pc Opening mold ejector rod x 1pc Cylinder cleaning rod x 1pc |
Specification:
Product specification
| Temperature control | Normal~400° C± 0.11° C, |
| PID control | indlude overheat protected |
| Poise Weight | 100g, 2160g, 3800g, 5000g, 7160g, 10000g, 12500g, 21600g (choose one) |
| Cylinder | 9.5504± 0.0076mm |
| Pistion | 9.4742± 0.0076mm |
| Die Out | 9.5± 0.002mm |
| Inside | 2.0955± 0.0051mm |
| length | 8.00± 0.02mm |
| Auto cutoff device | Auto/manual selection, time interval 0.1~9999min |
Accessories
Brush for clean the die
Brush for clean the cylinder
Speculum
Bakelitefunnel for charging sample
Three steel sheets for cutting off the extruded sample
Cylinder gauge
Auto pneumatic loading device
Optional
| Volume | (WxDxH) 40*51*60cm |
| Weight | 42kg (exclude poise weight) |
| Power | 1 AC220V 3.5A |
| Mercury thermometer | 150° C, 200° C, 250° C, 300° C (choose one) |
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
After-service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
other products