TitleProduct

Stainless Steel Pneumatic Angle Seat Control Valve (JN-STV1002)

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Zhejiang

  • Validity to:

    Long-term effective

  • Last update:

    2017-10-03 08:36

  • Browse the number:

    219

Send an inquiries
+
Wenzhou Joneng Valves Co., Limited
Contactaixin:

Ms. Zhang(Mr.)  

Email:

telephone:

phone:

Arrea:

Zhejiang

Address:

1301, Canghe Jinyuan, Longwan, Wenzhou, Zhejiang, China 325024

Website:

http://joneng.aozbao.com/

+

Stainless Steel Pplastic Pneumatic Angle Seat Control Valve (JN-STV1002)

Nominal Diameter: DN15-80
Pressure Range: 0-1.6-2.5MPa
Medium Temp.: -20 ~+180 Centigrade
Ambient Temp.: -20~+60 Centigrade
Valve Body Material: Stainless steel
Sealing Material: PTFE
Actuator Cover: PA
Applicable Medium: Air, liquid, steam
Controlling Pressure: 3-8bar
Type: Double-acting, single-acting, no water hammer
Connecting Thread Standard: Rp (BSP), Rc (BSPT), NPT

Option: Manual Position-Limit Actuator
This kind of actuator can adjust the piston opening, limit travel and adjusts the valve flow. It is applicable to all types of angle seat valve and also used for emergency brake when air supply is failed or mechanical (solenoid) failure occurs.




FAQ:
1. Are you a trading company or factory? We are a manufacturing factory.
2. Do you have FDA certificate for the materials? Yes, FDA is very important for the food processing machines.
3. How do you control the quality? 
 Quality control is very important to avoid material mixing and poor quality. We control the quality from beginning to the end. We only have 304 and 316L two different materials. 100% inspection on raw materials. During production, different materials in different places. After materials are finished, we choose 10% for inspection. If there is 0.1% problem in 10%, then no excuse to go ahead for inspecting 100% of the materials.
4. About chemical components
This is first concerning for customers. We take our materials to our laboratory for each lot. You may ask for the laboratory report any time. 
5. If there is any quality problem, how do you solve it? 
We are very proud that we never let one customer leave us. We are not 100% perfect, there is some quality problem. We try our best to provide the correct materials in the beginning, so we need less time for quality problem. 
If there is any quality problem, we take the responsibility. We believe what we are doing together, it will get back tomorrow. If we leave our responsibility, customers will leave us. If we always take our responsibility, we keep our customers with us. 
 
6. How long is your delivery time? For normal products in 7-10 days; for bulk order, in 15-25 days. It depends.
7. Warranty 
 3 years warranty for all of our stainless steel products. Gaskets are not included due to the different application for customers. 
8. More questions are appreciated.