Fuming Nitric Acid Wasted Electroplating Waste Water Flowmeter
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Zhejiang
-
Validity to:
Long-term effective
-
Last update:
2017-12-12 20:50
-
Browse the number:
194
+
Xi'an Tosilon Automation Co., Ltd.
- Contactaixin:
Mr. Kevin Huang(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Zhejiang
Address:No. 229, Daqing Rd, Lianhu Dist, Xi'an, Shaanxi, China 710065
- Website:
+
Fuming nitric acid wasted electroplating waste water flowmeter
| Technical Performance Parameters | ||
| Diameter Nominal | DN10 ~ DN1000 | |
| Nominal Pressure | 0.6~4.0MPa(special pressure can be made to) | |
| Accuracy | ±0.3%, ±2mm/s (flowrate < 1m/s) | |
| Liner material | PFA,F46,Neoprene,PTFE, FEP | |
| Electrode material | Stainless steel SUS316, Hastelloy C, Titanium, Tantalum Platinum-iridium | |
| Medium Temperature | Integral type | -10°C~+80°C |
| Split type | -25 - 180ºC | |
| Ambient Temperature | -10ºC~60ºC | |
| Medium Electrical conductivity | water 20μS/cm other medium 5μS/cm | |
| Structure type | Integral type, split type | |
| Protection Class | IP65,IP68(optional) | |
| Product Standard | JB/T 9248-1999 Electormagnetic Flowmeter | |
| Lining material | Main Performance | Applications |
| Teflon | 1.The most steady material in plastics which is resistibal to boiling hydrochloric acid,vitriolandqua fortis as well as strong alkali and organic impregnates. 2.Not be perfect in abrasion resistance. |
Strong corrosive mediums such as strong acid and alkali |
| PFA | Having the same abrasion resistance with PTFE. Having strong ability of load pressure resistance. |
Applicable in state of load pressure |
| F46 | 1.Have the same abrasion resistance with PTFE. 2.Resistable for low abrasion. 3.Having strong resistance to load pressure. |
1.The same as PTFE.2.Applicable in mediums of low abrasion. |
| Neoprene | 1.Be of good elasticity,retractility and abrasion resistance. 2.Be resistant to low aicd,alkali and salt but not for oxidation mediums. |
Water,sewage and slurry,mineral serosity of low abrasion. |
| Polyurethane | 1.Be of good abrasion resistibility. 2.Not be perfect in acid/alkali resisitance. 3.Can't be used for water mixed with organic impregnants. |
Applicable in mineral serosity,slurry and coal slurry of high abrasion. |
| Electrode material | Applications |
| Stainless steel SUS316 | Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol, chemistry,carbamide,etc |
| Stainless steel covered with tungsten carbide |
Applicable in mediums of no corrosive and low abrasion. |
| Hastelloy B(HB) | Having strong resistance to hydrochloric acid of any consistance which is below bioling piont. Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt. |
| Hastelloy C(HC) | Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water |
| Titanium | Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such as Fe+++,Cu++)is greatly reduce corrosion. |
| Da | In addition to hydrofluoric acid, fuming sulfuric acid, alkali remaining outside chemicals, including boiling hydrochloric acid |
| Platinum-iridium | Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt. |
other products
