Heatless Regenerative Adsorption Desiccant Air Dryer
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Guangdong
-
Validity to:
Long-term effective
-
Last update:
2017-08-07 09:49
-
Browse the number:
217
+
Biteman Technology Co., Ltd.
- Contactaixin:
Ms. Biteman(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Guangdong
Address:D2001e, Caifugang Center, Baoyuan Rd, Xixiang, Bao'an District, Shenzhen, Guangdong, China 518102
- Website:
+
BITEMAN Modular units heated desiccant air dryer
Unique features
-Less than 2% purge air with only 0.4kw to 4.4kw power consumption,no auxiliary motor
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccant chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40ºC (-40F) is ensured
-The lowest operation cost,user could recoup dryer investment in three years by saving huge purge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
Details of advantages
Innovative structure with patents,employs small desiccant chamber unit
1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control
Structure and operation
Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration
Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
Working condition:
Standard working condition:Inlet pressure 7bar≤P<10bar,Temperature T≤35
Working condition:Pressure 4bar≤P<10bar,Temperature 2ºC≤T≤40ºC
Technical date:Pressure dew point≤-40ºC or -40°F
Purge air:2%/heated;5%/heatless
Pressure drop ≤ 0.012MP
Noise ≤ 75dB(average)
Technical data:
Installation
Unique features
-Less than 2% purge air with only 0.4kw to 4.4kw power consumption,no auxiliary motor
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccant chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40ºC (-40F) is ensured
-The lowest operation cost,user could recoup dryer investment in three years by saving huge purge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
Details of advantages
Innovative structure with patents,employs small desiccant chamber unit
1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control
Structure and operation
Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration
Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
Working condition:
Standard working condition:Inlet pressure 7bar≤P<10bar,Temperature T≤35
Working condition:Pressure 4bar≤P<10bar,Temperature 2ºC≤T≤40ºC
Technical date:Pressure dew point≤-40ºC or -40°F
Purge air:2%/heated;5%/heatless
Pressure drop ≤ 0.012MP
Noise ≤ 75dB(average)
Technical data:
Installation
