Inductive Proximity Differential Vibration Sensor
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Zhejiang
-
Validity to:
Long-term effective
-
Last update:
2017-10-13 07:56
-
Browse the number:
280
+
Ningbo Cowell Industry Co., Limited
- Contactaixin:
Mr. Charlie Tong(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Zhejiang
Address:Room908 Meiliyuan Building, No.668 North Liyuan Road, Ningbo Zhejiang, Ningbo, Zhejiang, China 315010
- Website:
+
Inductive Proximity Differential Vibration Sensor
Product Description
Structure:
1. Demension: 10*10*15mm(W*L*H)
2. The external structure size, Welding wire head diameter, spacing, should conform to
The drawing size
3. Product structure, appearance should be no visible flaws, active parts(magnet,
Magnetic core), Should be no jammed or delay phenomenon.
4. Products after soldering (the temperature in 250-260 degrees, time for 3 seconds,
Welding feet need to be strong, no break line, deformation occurs
Function:
Displacement detection based: Acceleration
The object to be tested (e. G., car ) by vibration (displacement), the sensor will be output a
Weak electric current signals. The current intensity is proportional to the vibration
Amplitude. And the current will be compared amplifier by the circuit of the operational
Amplifier. The end of circuit will be use a NPN transistor to through the R9 to output a
Drop-down signal( reference circuit 1), and the sensitivity can be adjusted appropriate by
The circuit of VR1.
Appliances:
GPS
Car alarm
Burglar monitors
Anti-theft device
Other vibration sensor device
PACKAGE AND DELIVERY
1. Inner Packing is the PE film bag
2. Out packing is Paper carton or wooden box packing
3.Depend on the customer's requirements.
Delivery Detail: 20-25 working days.
OUR SERVICE
1. Measure dimension of screw and barrel
2. Complete manufacturing drawing
3. Make optimal solution based on customer's require
4.Calculate the cost of goods
5.Take photos of finished screw barrel
6 Make booking and shipping schedule
7.Send customs clearance documents
8.Arrange factory visiting schedule
9.Assistant with customers to deal other matters
COMPANY INTRODUCTION
NINGBO COWELL INDUSTRY CO.,LTD was established in 2006. It's highly involved in manufacturing of injection screw barrel, extruder screw barrel, rubber machine screw barrel as well as ball screw, linear guide, which are the critical component of precision machinery and mainly applied to Plastics Injection Machine, Plastic processing extruder, Machine Tool, Engineering machine, Precision Orientation Equipment and other equipments and machines.
It has professional technician team, engaged in manufacturing and researching of screw barrel. Recent years, Cowell industry places great emphasis in upgrading not only the manufacturing and quality of screw barrel but also after sales service. We uphold the concept "customer first", to provide professional, promptly and attentive service as well as better solution to continuously create value for customers.Good reputation has won the recognition from domestic and oversea market. Now we have exported to more than 30 countries and regions, including Middle East, Southeast Asia, France, Denmark, Finland, Italy, Poland, Brazil and Chile etc.
We warmly welcome customers oversea to build long term cooperation relationship with us!
Product Description
Structure:
1. Demension: 10*10*15mm(W*L*H)
2. The external structure size, Welding wire head diameter, spacing, should conform to
The drawing size
3. Product structure, appearance should be no visible flaws, active parts(magnet,
Magnetic core), Should be no jammed or delay phenomenon.
4. Products after soldering (the temperature in 250-260 degrees, time for 3 seconds,
Welding feet need to be strong, no break line, deformation occurs
Function:
Displacement detection based: Acceleration
The object to be tested (e. G., car ) by vibration (displacement), the sensor will be output a
Weak electric current signals. The current intensity is proportional to the vibration
Amplitude. And the current will be compared amplifier by the circuit of the operational
Amplifier. The end of circuit will be use a NPN transistor to through the R9 to output a
Drop-down signal( reference circuit 1), and the sensitivity can be adjusted appropriate by
The circuit of VR1.
Appliances:
GPS
Car alarm
Burglar monitors
Anti-theft device
Other vibration sensor device
| SN [mm] | 30cm |
| Light source | |
| Output | NPN/PNP NO/NC |
| Power supply | 10-36VDC |
| Protection degree | IP65 |
| Response time | <3 ms |
| Hysteresis | 3-20% |
| Repeat accuracy | ≤5% |
| Load current | ≤200mA |
| Residual voltage | ≤2.5V |
| Consumption current | ≤25mA |
| Protection circuit |
Surge, reverse polarity and short-circuit |
| Indicator | Yellow LED |
| Ambient temp.[ºC] | -15~55ºC |
| Ambient RH | 35-95% |
| Housing material | ABS/PC |
| Connection | PVC cable 2 m |
|
GH1502T |
GH1505T | GH1510T | GH1513T | ||||
| Range | ±2G | ±5G | ±10G | ±13G | |||
| Zero Bias | 2.5V±0.05V | ||||||
| 0 Bias Temp. | ±1.0 mg/ºC | ||||||
| Bandwidth | 800 Hz | ||||||
| Sensitivity | 1000mV | 400mV | 200mV | 133mV | |||
| Sens. Bias Temp | ±0.01%/°C | ||||||
| Nonlinearity | 0.1%FS | ||||||
| Cross Axis Sensitivity | 2.0% | ||||||
| Work Temp. | -40~85°C | ||||||
| Shock | 2500G/0.5ms | ||||||
| Sealing | IP65 | ||||||
PACKAGE AND DELIVERY
1. Inner Packing is the PE film bag
2. Out packing is Paper carton or wooden box packing
3.Depend on the customer's requirements.
Delivery Detail: 20-25 working days.
OUR SERVICE
1. Measure dimension of screw and barrel
2. Complete manufacturing drawing
3. Make optimal solution based on customer's require
4.Calculate the cost of goods
5.Take photos of finished screw barrel
6 Make booking and shipping schedule
7.Send customs clearance documents
8.Arrange factory visiting schedule
9.Assistant with customers to deal other matters
COMPANY INTRODUCTION
NINGBO COWELL INDUSTRY CO.,LTD was established in 2006. It's highly involved in manufacturing of injection screw barrel, extruder screw barrel, rubber machine screw barrel as well as ball screw, linear guide, which are the critical component of precision machinery and mainly applied to Plastics Injection Machine, Plastic processing extruder, Machine Tool, Engineering machine, Precision Orientation Equipment and other equipments and machines.
It has professional technician team, engaged in manufacturing and researching of screw barrel. Recent years, Cowell industry places great emphasis in upgrading not only the manufacturing and quality of screw barrel but also after sales service. We uphold the concept "customer first", to provide professional, promptly and attentive service as well as better solution to continuously create value for customers.Good reputation has won the recognition from domestic and oversea market. Now we have exported to more than 30 countries and regions, including Middle East, Southeast Asia, France, Denmark, Finland, Italy, Poland, Brazil and Chile etc.
We warmly welcome customers oversea to build long term cooperation relationship with us!
| Year Company Established: | 2006 |
| Annual Sales Amount: | US$10 - 50 Million |
| Total No. of Staff: | 51 - 100 People |
| Business Type: | Manufacturer |
| Quality Certificate: | CE, ISO9001 |
| Main Export Markets: | Western Europe, Eastern Europe, South America, |
| Southeast Asia, Mid East, Africa |
