2017 Super Strong Neodymium Iron Boron Magnet, Neodymium Magnets (CTS-24)
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Fujian
-
Validity to:
Long-term effective
-
Last update:
2017-12-10 13:22
-
Browse the number:
157
+
Xiamen Yuxiang Magnetic Materials Ind. Co., Ltd.
- Contactaixin:
Mr. Yingjun Liu(Mr.)
-
Email:
telephone:
-
Arrea:
Fujian
Address:16 Floor, JinYuan Building, No. 57 Hubin South Road, Xiamen, Fujian, China 361004
- Website:
+
General Introduction:
1. Our NdFeB rare earth magnet is particularly suitable for high volumn production of a wide variety of shapes and size ranges.
2. Precise dimensional control is achieved in both processed and usually the component does not require further machining
3. Injection moulded NdFeB do not normally require coating due to better corrosion resistance, however coating is recommended for compression moulded NdFeB.
Features
1. High energy ranging from 8MGOe to 48MGOe with wondrerful coercive force.
2. Less expensive,and mechanically stronger and less brittle than SmCo
3. Density:13%,smaller than SmCo products
4. For most applications,coating or plating is recommended.
Advantages:
1. High energy
2. Very high Hc and Hci output
3. More economical than SmCo
4. Wonderful performance at ambient temperature.
When inquiring or ordering, please send us following information:
1.Type of magnet (material & grade)
2.Quantity (annual and per shipment)
3.Shape and dimensions (drawing if necessary)
4.Direction of magnetization
5.Magnetized or unmagnetized
6.Details of surface treatment
7.Application if possible
8.Other information and/or requirements
hope to cooperate with you
Thank you.
For more detail info, please feel free to visit our website or inquire us at any of your convenience..
1. Our NdFeB rare earth magnet is particularly suitable for high volumn production of a wide variety of shapes and size ranges.
2. Precise dimensional control is achieved in both processed and usually the component does not require further machining
3. Injection moulded NdFeB do not normally require coating due to better corrosion resistance, however coating is recommended for compression moulded NdFeB.
Features
1. High energy ranging from 8MGOe to 48MGOe with wondrerful coercive force.
2. Less expensive,and mechanically stronger and less brittle than SmCo
3. Density:13%,smaller than SmCo products
4. For most applications,coating or plating is recommended.
Advantages:
1. High energy
2. Very high Hc and Hci output
3. More economical than SmCo
4. Wonderful performance at ambient temperature.
When inquiring or ordering, please send us following information:
1.Type of magnet (material & grade)
2.Quantity (annual and per shipment)
3.Shape and dimensions (drawing if necessary)
4.Direction of magnetization
5.Magnetized or unmagnetized
6.Details of surface treatment
7.Application if possible
8.Other information and/or requirements
hope to cooperate with you
Thank you.
For more detail info, please feel free to visit our website or inquire us at any of your convenience..
| Property Grade | Residual Flux Density Br. | Coercive Force Hcb | Intrinsic Coercive force Hcj |
Max. energy product (BH)max | Relative Recoil Permeability µ rec | Density | Temp. Coefficient α (Br) | Curie Temp. Tc | Recommended Magnetization Field |
| KGs (mT) |
Oe (KA/m) |
Oe (KA/m) |
MGOe (KJ/m 3 ) |
_ | g/cm 3 | %/K | ° C | Koe (KA/m) |
|
| Alnico 7/8 | 3.4 (340) |
900 (72) |
1050 (84) |
0.88 (7.0) |
3.0 | 5.6 | -0.02 | 850 | 3.0 (240) |
| Alnico 8/10 | 3.5 (350) |
1000 (80) |
1200 (96) |
1.00 (8.0) |
3.0 | 5.8 | -0.02 | 850 |
