Melt Pump for Extruder Machine Melting Pump
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Zhejiang
-
Validity to:
Long-term effective
-
Last update:
2017-09-10 15:32
-
Browse the number:
92
+
Ningbo Cowell Industry Co., Limited
- Contactaixin:
Mr. Charlie Tong(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Zhejiang
Address:Room908 Meiliyuan Building, No.668 North Liyuan Road, Ningbo Zhejiang, Ningbo, Zhejiang, China 315010
- Website:
+
MELT PUMP FOR PLASTIC EXTRUDER MACHINE
KEYWORDS: MELT PUMP,MELTING PUMP,GEAR MELT PUMP
BRAND:COWELL
DELIVERY TIME:10-25 DAYS
MEANS OF TRANSPPORT:BY SEA,BY AIR OR BY EXPRESS
STANDARD:ISO, DIN
DIMENSION:CUSTOM MADE
PRODUCTION INFORMATION OF MELT PUMP
The prime reason for adding a melt pump to an extrusion system is to improve the throughput stability. There are. However, other major advantages in using a melt pump at the output of the extruder:
1:The output can almost be increased-typically by 15% to 25%
2:When a melt pump is used, the extruder only has to generate enough pressure to fill the teeth of the
melt pump. The melt pump will generate the pressure required to push the plastic through the die.
3:The melt temperature of plastic is almost always significantly lowered
4:Much higher die pressure can be achieved, where they are required.
OPERATING PARAMETER OF MELT PUMP
TECHNICAL PARAMETER OF MELT PUMP
Melt Pump Body:high temperature tool steel, chromium-nickel steel
Gear:high temperature tool steel, nitrided steel
Tooth profile:straight tooth, helical tooth, herringbone tooth
Sliding Bearing:high temperature tool steel
Shaft Sealing:screw sealing, packing seal, screw sealing+packing seal, other combined sealing
Heating System:Electrical Heating
SPECIFICATION OF MELT PUMP
PACKAGE AND DELIVERY
1. Inner Packing is the PE film bag
2. Out packing is Paper carton or wooden box packing
3.Depend on the customer's requirements.
Delivery Detail: 20-25 working days.
OUR SERVICE
1. Measure dimension of screw and barrel
2. Complete manufacturing drawing
3. Make optimal solution based on customer's require
4.Calculate the cost of goods
5.Take photos of finished screw barrel
6 Make booking and shipping schedule
7.Send customs clearance documents
8.Arrange factory visiting schedule
9.Assistant with customers to deal other matters
COMPANY INTRODUCTION
NINGBO COWELL INDUSTRY CO.,LTD was established in 2006. It's highly involved in manufacturing of injection screw barrel, extruder screw barrel, rubber machine screw barrel as well as ball screw, linear guide, which are the critical component of precision machinery and mainly applied to Plastics Injection Machine, Plastic processing extruder, Machine Tool, Engineering machine, Precision Orientation Equipment and other equipments and machines.
It has professional technician team, engaged in manufacturing and researching of screw barrel. Recent years, Cowell industry places great emphasis in upgrading not only the manufacturing and quality of screw barrel but also after sales service. We uphold the concept "customer first", to provide professional, promptly and attentive service as well as better solution to continuously create value for customers.Good reputation has won the recognition from domestic and oversea market. Now we have exported to more than more than 30 countries and regions, including Middle East, Southeast Asia, France, Denmark, Finland, Italy, Poland, Brazil and Chile etc.
We warmly welcome customers oversea to build long term cooperation relationship with us!
KEYWORDS: MELT PUMP,MELTING PUMP,GEAR MELT PUMP
BRAND:COWELL
DELIVERY TIME:10-25 DAYS
MEANS OF TRANSPPORT:BY SEA,BY AIR OR BY EXPRESS
STANDARD:ISO, DIN
DIMENSION:CUSTOM MADE
| Theory | Rotary Pump |
| Power | Electric |
| Pressure | High pressure |
| Sliding Bearing | High Temperature Tool Steel |
| Shaft sealing | Spiral sealing |
| Inlet Pressure | ≤12MPa |
| Standard or Nonstandard | Standard |
| Fuel | driving motor |
| Heating System | Electric heating |
| Usage | Polymer Melt Gear Pump |
PRODUCTION INFORMATION OF MELT PUMP
The prime reason for adding a melt pump to an extrusion system is to improve the throughput stability. There are. However, other major advantages in using a melt pump at the output of the extruder:
1:The output can almost be increased-typically by 15% to 25%
2:When a melt pump is used, the extruder only has to generate enough pressure to fill the teeth of the
melt pump. The melt pump will generate the pressure required to push the plastic through the die.
3:The melt temperature of plastic is almost always significantly lowered
4:Much higher die pressure can be achieved, where they are required.
OPERATING PARAMETER OF MELT PUMP
| Volume Range | 0.5CC - 3200CC |
| Viscosity | No ≤40000 |
| Working Temperature | ≤400 ° C (750 ° F) |
| Cleaning Temperature | ≤450 ° C (850 ° F) |
| Outlet Pressure | 40MPa(6000psi) |
| Differential Pressure | ≤25Mpa |
TECHNICAL PARAMETER OF MELT PUMP
Melt Pump Body:high temperature tool steel, chromium-nickel steel
Gear:high temperature tool steel, nitrided steel
Tooth profile:straight tooth, helical tooth, herringbone tooth
Sliding Bearing:high temperature tool steel
Shaft Sealing:screw sealing, packing seal, screw sealing+packing seal, other combined sealing
Heating System:Electrical Heating
SPECIFICATION OF MELT PUMP
| Type | CC/Rev | Capacity(L/H) | Heating Power(kw) | Dirven system (kw) |
| HE-0.2 | 0.2 | 0.1-0.6 | 0.5 | 0.37 |
| HE-1 | 1 | 0.5-3 | 1 | 0.5 |
| HY-2 | 2 | 1-6 | 1 | 0.75 |
| HE-5 | 5 | 2.5-15 | 1 | 1.1 |
| HE-10 | 10 | 5-30 | 1 | 1.5 |
| HE-20 | 20 | 10-60 | 2 | 2.2 |
| HE-31.5 | 31.5 | 15-90 | 2 | 3 |
| HE-50 | 50 | 25-150 | 3 | 4 |
| HE-100 | 100 | 50-300 | 4 | 5.5 |
| HE-150 | 150 | 75-450 | 5 | 7.5 |
PACKAGE AND DELIVERY
1. Inner Packing is the PE film bag
2. Out packing is Paper carton or wooden box packing
3.Depend on the customer's requirements.
Delivery Detail: 20-25 working days.
OUR SERVICE
1. Measure dimension of screw and barrel
2. Complete manufacturing drawing
3. Make optimal solution based on customer's require
4.Calculate the cost of goods
5.Take photos of finished screw barrel
6 Make booking and shipping schedule
7.Send customs clearance documents
8.Arrange factory visiting schedule
9.Assistant with customers to deal other matters
COMPANY INTRODUCTION
NINGBO COWELL INDUSTRY CO.,LTD was established in 2006. It's highly involved in manufacturing of injection screw barrel, extruder screw barrel, rubber machine screw barrel as well as ball screw, linear guide, which are the critical component of precision machinery and mainly applied to Plastics Injection Machine, Plastic processing extruder, Machine Tool, Engineering machine, Precision Orientation Equipment and other equipments and machines.
It has professional technician team, engaged in manufacturing and researching of screw barrel. Recent years, Cowell industry places great emphasis in upgrading not only the manufacturing and quality of screw barrel but also after sales service. We uphold the concept "customer first", to provide professional, promptly and attentive service as well as better solution to continuously create value for customers.Good reputation has won the recognition from domestic and oversea market. Now we have exported to more than more than 30 countries and regions, including Middle East, Southeast Asia, France, Denmark, Finland, Italy, Poland, Brazil and Chile etc.
| Year Company Established: | 2006 |
| Annual Sales Amount: | US$10 - 50 Million |
| Total No. of Staff: | 51 - 100 People |
| Business Type: | Manufacturer |
| Quality Certificate: | CE, ISO9001 |
| Main Export Markets: | Western Europe, Eastern Europe, South America, |
| Southeast Asia, Mid East, Africa |
