High Strength FRP I Beam
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Jiangsu
-
Validity to:
Long-term effective
-
Last update:
2017-11-05 08:09
-
Browse the number:
277
+
Nanjing Jinglue FRP Co., Ltd.
- Contactaixin:
Mrs. Yan(Mr.)
-
Email:
telephone:
phone:
-
Arrea:
Jiangsu
Address:Wuwei Road 68#, Pengfu Community, Lukou Street, Jiangning District, Nanjing, Jiangsu, China 211156
- Website:
+
1. FRP I beam are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.
2. FRP I beam can meet the customer's requirements by using different combination of resin, fibers and others.
3. FRP I beam offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
4. FRP I beam is extensively suitable for operation platform, equipment platform, stair tread, ditch cover, bridge walkway, supporting for filter filling. In petroleum, chemical, power, offshore prospecting electroplating, marring water and waster water treatment, paper making, brewery and pharmacy industries. It is satisfying load-bearing member in corrosive environmen
5. Some normal sizes of FRP I beam:(Pls note special sizes are also welcomed.)
6. Following is General Physical Parameters of FRP Pultruded Profiles.(If have special requirements, pls contact Nanjing Jinglue.)
LW-lengthwise CW-crosswise PE=perpendicular to laminate face
2. FRP I beam can meet the customer's requirements by using different combination of resin, fibers and others.
3. FRP I beam offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
4. FRP I beam is extensively suitable for operation platform, equipment platform, stair tread, ditch cover, bridge walkway, supporting for filter filling. In petroleum, chemical, power, offshore prospecting electroplating, marring water and waster water treatment, paper making, brewery and pharmacy industries. It is satisfying load-bearing member in corrosive environmen
5. Some normal sizes of FRP I beam:(Pls note special sizes are also welcomed.)
6. Following is General Physical Parameters of FRP Pultruded Profiles.(If have special requirements, pls contact Nanjing Jinglue.)
LW-lengthwise CW-crosswise PE=perpendicular to laminate face
| Mechanical performance | Value | Units | Test method | ||||||
| Tensile strength | LW | 230-600 | Mpa | ASTM D-638 | |||||
| CW | 45-80 | ||||||||
| Tensile modulus | LW | 18-30 | Gpa | ASTM D-638 | |||||
| CW | 7-13 | ||||||||
| Flexural strength | LW | 300-700 | Mpa | ASTM D-790 | |||||
| CW | 80-120 | ||||||||
| Flexural modulus | LW | 20-26 | Gpa | ASTM D-790 | |||||
| CW | 7-12 | ||||||||
| Compressive strength | LW | 280 | Mpa | ASTM D-695 | |||||
| CW | 105 | ||||||||
| Compressive modulus | LW | 21 | Gpa | ASTM D-695 | |||||
| CW | 7.9 | ||||||||
| Interlayer shear strength | LW | 25 | Mpa | ASTM D-2344 | |||||
| Impact strength | 280 | KJ/M2 | ASTM D-256 | ||||||
| Physical property | Value | Units | Test method | ||||||
| Barcol Hardness | 50 | --- | ASTM D-495 | ||||||
| Water absorption(25 Centigrade,24h) | 0.2-0.5 | % | ASTM D-570 | ||||||
| Density | 1.75-2.00 | g/cm3 | ASTM D-792 | ||||||
| Coefficient of thermal expansion(LW) | 5.0 | 10-6/Centigrade | ASTM D-696 | ||||||
| Coefficient of thermal conductivity | 0.4 | W/(m.K) | ASTM C-518 | ||||||
| Elongation to break | 0.9 | % | ASTM D-638 | ||||||
| Electrical property | Value | Units | Test method | ||||||
| Arc resistance(LW) | 120 | seconds | ASTM D-495 | ||||||
| Dielectric constant(PF) | 5 | @60hz | ASTM D-150 | ||||||
| Dielectric strength(PF) | 8 | KV/mm | ASTM D-149 | ||||||
| Dielectric strength(LW) | 1.6 | KV/mm | ASTM D-149 | ||||||
| Flammability property | Value | Units | Test method | ||||||
| Tunnel test | Max 25 | second | ASTM E-4 | ||||||
| Oxygen data | 25-28 | % | ASTM 2863 | ||||||
| 28-32 | |||||||||
| >32 | |||||||||
| Flammability classification | Self extinguish | ASTM D635 | |||||||
other products
