TitleProduct

Electric Power Copper Cable with PVC Sheathed

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2017-11-08 02:12

  • Browse the number:

    209

Send an inquiries
+
Yangzhou Shuguang Cable Co., Ltd.
Contactaixin:

Ms. Betty Cao(Mr.)  

Email:

telephone:

phone:

Arrea:

Jiangsu

Address:

12th Floor, Integrity Tower, No.547 Museum Road, Hanjiang District, Yangzhou, Jiangsu, China 225652

Website:

http://shuguangcable.aozbao.com/

+

Electric Power Cable With PVC Sheath

Standard implemented

The product conforms to the GB/T 12706,IEC 60502,IEC 60840 and IEC 62067. Its flame retardant property has reached the corresponding requirement in GB/T18380.3-2001; Burning smoke intensity (luminousness) is up to the low-smoke standard of GB/T17651-1998; Burning gas lorrosion intensity is in conform to the standard requirement in GB/T17650-1990; The luminousness of burning low halogen and low smoke cable and the liberation of HCl active gas is conform to the standard requirement of Q/321084KLA 051-2004.

Service characteristic

For normal use of halogen free low smoke cable, the permitted longtime operating temp. Of conductor is 90 deg. C; For short circuit (the longest time is 5 seconds), the max temp. Of conductor should not exceed 250 deg. C. For low halogen low smoke cable, the permitted longtime operating temp. Of conductor should not exceed 70 deg. C; For short circuit (the longest time is 5 seconds), the max temp. Of conductor should not exceed 160 deg. C.

The lowing temp. For laying cables is 0 deg. C. As for shortest bend radius: For cables without sheath, it should not be shorter than 10 times of outer diam; For cables with sheath; It should not be shorter than 15 times of outer diam.

Specification
Types Core No. Rated Vpltage(kV)
Cu Core Al Core 1.8/3 3.6/6 6/6 6/10 8.7/10 8.7/15 12/20 18/20 26/35
Cross Section (mm2)
YJV YJY YJV32 YJV33 YJV42 YJV43 YJLV YJLY YJLV32 YJLV33 YJLV42 YJLV43 1 10~800 10~1000 10~1000 10~1000 10~1000 10~1000 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 25~1200 35~1200 35~1200 35~1200 35~1200 35~1200 35~1200 50~1200 50~1200 50~1200 50~1200 50~1200 50~1200
YJV YJY YJV22 YJV23 YJV32 YJV33 YJV42 YJV43 YJLV YJLY YJLV22 YJLV23 YJLV32 YJLV33 YJLV42 YJLV43 3 10~300 10~300 10~300 10~300 10~300 10~300 10~300 10~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 25~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300 35~300

Nominal Cross Sectional (mm2) The Largest D.C. Resistance of Conductor at 20ºCΩ/km Nominal Cross Sectional (mm2) The Largest D.C. Resistance of Conductor at 20ºCΩ/km Nominal Cross Sectional (mm2) The Largest D.C. Resistance of Conductor at 20ºCΩ/km
Cu Core Al Core Cu Core Al Core Cu Core Al Core
1.5 12.1 - 35 0.521 0.868 240 0.0754 0.125
2.5 7.41 12.1 50 0.387 0.641 300 0.0601 0.1
4 4.61 7.41 70 0.268 0.443 400 0.047 0.0778
6 3.06 4.61 95 0.193 0.32 500 0.0366 0.0605
10 1.83 3.08 120 0.153 0.253 630 0.0283 0.0469
16 1.15 1.91 150 0.124 0.206 800 0.0211 0.0367
25 0.727 1.2 185 0.0991 0.164 1000 - 0.0291

Serial No. Item of Property Rated Voltage U0/U kV
1.83/3 3.6/6 6/6 6/10 8.7/10 8.7/15 12/20 18/20 18/30 21/35 26/35
1 Partial discharge test 1.73U0 should not be greater than / 10 5
2 Industrial frequency 5 min voltage endurance test(kV) 6.5 12.5 21 30.5 42 63 73.5 91
3 4h industrial frequency test(kV) 7.2 14.4 24 34.8 48 72 84 104
4 Heat extension test(200ºC 15 min 20N/cm) under pressure load extension rate max% Permanent extension rate max after cooling% 175/15
5 Partial discharge 1.5U0 after three times of curing and heat cycling should not be large than(pC) 20 5
7 Flame-retarding property test Conforms to the standard of IEC60 332-2C